The wishlist name can't be left blank

ShinePro Diamond-Impregnated Floor Pads

ShinePro Diamond-Impregnated Floor Pads

Non-Stock: Allow Extra Delivery Time
Type: Dry or Wet

Brand Superabrasive

In stock
Only %1 left
As low as $65.95
groundshipping
airshipping
  • Grabo Pro Lifter 20
  • Grabo Pro Lifter 20
  • Grabo Pro Lifter 20

ShinePro Diamond-Impregnated Floor Pads

Better Maintenance Pads For More Beautiful Floors

ShinePro are high quality diamond-impregnated pads available in several sizes for use under swing machines and burnishers.
They require only water (no wax or chemicals needed), and are a very environmentally friendly solution for maintaining floors.

Note:
ShinePro Floor Pads can be used wet or dry and are comparable to HTC Twister Pads. They are also available in 7", 8", 9", 13", 14", 16", 20", 21", and 27" sizes. Please let our sales staff know if you're interested in these sizes, as they can be special ordered.

Before using ShinePro pads
, make sure that the floor surface is free of any debris that can cause surface scratching. Run a vacuum over the surface to ensure the surface is ready.

1) 220 Grit ShinePro Pad - This is the most aggressive pad used for removal of sealers and guard products before repolishing. Works best when used in conjunction with clean water. We recommend applying lithium densifier to the entire surface of the floor and allowing it to dry per the manufacturers specifications. Follow with an auto scrubber to clean remaining residue/film off of the floor completely before advancing to the next step.

2) 400 Grit ShinePro Pad - This pad will begin to hone the floor back to its original luster and prepare it to properly receive the next step which will begin the re-polishing of your floor. Follow with an auto scrubber to clean remaining residue/film off of the floor completely before advancing to the next step.

3) 800 Grit ShinePro Pad - This pad is the first polishing step for Diama-Clean. Use with water only and follow with an auto scrubber to clean remaining residue/film off of the floor completely before advancing to the next step.

4) 1800 Grit ShinePro Pad - This is pad is used for optimum polish and shine. We recommend applying a second lithium densifier coat to the entire surface of the floor and allow it to dry per the manufacturers specifications Use with water and follow with an auto scrubber to clean remaining residue/film off of the floor completely before advancing to the next step.

5) Buff Grit ShinePro Pad - We recommend using this pad as your last step to buff the entire floor. If applying a guard or stain protector to the floor we recommend using this pad after that process is completed and the product is completely dry per the manufacturer’s specifications.

Brand Superabrasive