The Sinkits LC Bracket provides an undermount sink installation option when there is not enough room for conventional clips or clamps. The bracket mounts to the cabinet side wall and uses an adjustable screw to hold the sink rim securely against the stone.
Notched sections allow the bracket to be bent when necessary for flat placement against the cabinet wall.
Advantages
Designed for installations with limited space
Provides an alternative to conventional sink clips and clamps
Mounts to the cabinet side wall
Adjustable screw secures the sink rim against the stone
Notched bracket can be bent for proper cabinet-wall placement
Place the sink into position and hold it with tape or a bar clamp. Remove excess caulk.
Position the end of the LC Bracket with the tab and adjustment screw against the sink rim.
If necessary, bend the bracket at the notches so it rests flat against the cabinet side wall.
Pre-drill the mounting holes in the cabinet side wall.
Install the provided screws.
Adjust the screw against the sink rim until the sink is snug against the stone. Do not overtighten or lift the stone.
Smooth and remove any remaining excess caulk.
Manufacturer Support
Brian Brutting, Senior Customer Service and Technical Specialist for Caesarstone USA, stated that the Sinkits LC Bracket meets Caesarstone requirements for mounting undermount sinks.
Frequently Asked Questions
When should the Sinkits LC Bracket be used?
It is designed for undermount sink installations where there is not enough space for conventional clips or clamps.
Where does the bracket mount?
The LC Bracket mounts to the cabinet side wall.
Can the bracket be bent?
Yes. It can be bent at the notches when necessary to sit flat against the cabinet wall.
How is the sink tightened against the countertop?
An adjustable screw presses against the sink rim to hold the sink snugly against the stone.
How many brackets are included?
This package contains two Sinkits LC Brackets.
BB Industries carries professional stone fabrication tools, adhesives, polishing supplies, installation products, and equipment trusted by fabricators throughout North America.
