Alpha PSC-150 Pneumatic Stone Cutter

Alpha offers an industrial quality pneumatic stone cutter, called the PSC-150, which is equipped with a 2 hp motor, with a speed governor in the motor that regulates the air consumption according to the torque needed for the application. This regulation includes producing enough torque to cut 1-1/4” (3cm) stone slabs in one pass.

In addition, Alpha recognized the need for an industrial quality portable stone cutter that is capable of miter cutting of 1-1/4” (3cm) materials with ease, so that any stone fabricator can use it when miter cuts are required, without time-consuming setup. Since it is a pneumatic powered motor, you can save the repair and maintenance costs of electric stone cutters when sink-hole cutting and groove-cutting for rodding applications.

Alpha offers a carriage that retrofits on the Alpha Guide Rail System to support the application of making precise miter cuts for the perfect lamination. The PSC-150 offers kink-free water and air hoses to improve the maneuverability of the stone cutter. The flexibility of the hoses helps reduce operator fatigue and improves the operation. To ensure a long maintenance interval, we also recommend using the manifold system that comes with a regulator and filter to catch the debris and moisture delivered by compressed air.

The Alpha PSC-150 comes with an Eclipse II 6” blade which is the recommended turbo blade for granite and engineered stone. It can utilize a variety of consumables including the Alpha® Katana 6” for porcelain panels and slabs, Hot-Rod 4” for 1/4” steel rods and 1/8” fiber glass rods. For marble applications, a Libero 5” blade is recommended since most marble slabs are 3/4” (2cm) thick or less.

The PSC-150 is the 6” Pneumatic Saw which includes:

• (3) Flanges
• (2) Bolts (M6X30 Left) / (M6x20 Left)
• (1) Side Handle
• (1) Combination Wrench (9mm)
• (1) Hex Wrench (5mm)
• (1) Open End Spanner Wrench (22mm)
• (1) Air Hose (15ft / 4.5m)
• (1) Water Hose (15ft / 4.5m)
• (1) Rust Inhibitor Oil (8oz / 237ml)
• (1) Alpha Eclipse II 6" Blade
• (2) Muffler
• (1) Reduced Flow Air Inlet Fitting
• (2) Hook & Loop Strap
• (1) 6” Eclipse II Blade

Notice: It does NOT include the Carriage Assembly or the Guiderails or the Guiderail Kit.